(A Peer Review Journal)
e–ISSN: 2408–5162; p–ISSN: 2048–5170


Pages: 1032-1034
A. Aboshio and S. Aduku

keywords: Anthill-sancrete blocks, load bearing walls, compressive strength


This study assesses the early strength characteristics of sandcrete blocks made by replacing fine aggregate (sand) with anthill material. Normal mixing proportion of 1:6 (cement to sand) was used for the production of the control mix and other mixes by replacing the fine aggregate by weight of 10%, 20%, 30%, and 40% using the absolute volume method. Six (6) inches (450 × 225 × 150 mm) blocks were produced from the mixes, cured by sprinkling water for 3, 7, and 14 days and tested for their respective compressive strengths at those ages. Result obtained indicate that the compressive strength of the blocks increases with increase in the anthill content which is here attributed to the increased binding effect of the anthill material in complementing the traditional function of cement in the mix. Results obtained also show that the optimum content of anthill in production of anthill-sandcrete blocks is 20%. This leads to mixes that are of good workability and resulting in blocks also of reduced honeycombs and cracks with compressive strength at 14 days age adequate for use in framed building project with reference to the Building Code: 2000 standards.


Aboshio A, Zayyad IB, Naim G & Uche OAU 2016. Assessment of the Strength Properties of Cement Stabilized Solid Laterite Blocks, Proceedings of NIMACON 2016 Conference, Zaria, pp. 604 - 607. Adjei-Henne G 2009. Anthill as a resource for ceramics. A Ph.D Thesis Submitted to the scholl of graduate studies, Kwame Nkrumah University of Science and Technology, Ghana. Agbede IO & Joel M 2008. Use of cement-sand admixture in laterite brick production in low cost housing. Leonardo electron. J. Pract. Tecnol., 163–174. Aguwa, J.I., (2009). Study of compressive strength of laterite-cement mixes as a building material.AU Journal of Technology.Pages 114–120. BS 812 Part 1. (1975). Method for determining particle size. British Standard Institution, London. BS 882 1992. Specification for Aggregates from Natural Sources for Concrete. British Standard Institution, 2 Part Street London. BS EN 933-1: 2012. Tests for Geometrical Properties of Aggregates. Determination of Particle Size Distribution. Sieving Method. British Standard Institution, 2 Part Street, London. BS 1377 1990. Methods of Testing Soils for Civil Engineering Purposes. British Standard Institution, 2 Part Street London. BS 2028 1970. Precast Concrete Blocls. Her Majesty Stationery Office. British Standard Institution, 2 Part Street, London, England. BS 5328-2: 1997. Concrete. Methods for specifying concrete mixes. British Standard Institution, 2 Part Street, London. Building Code 2006. Nigerian National Building Code. Federal Republic of Nigeria. NIS 87:2004, NIS 2004. Standard for Sandcrete Blocks. Standards Organisation of Nigeria.